Compatible Black Brother DR-2100 Image Drum

Compatible Black Brother DR-2100 Image Drum - (Brother DR2100)
£20.00 excl tax
    • Name: Compatible Black Brother DR-2100 Image Drum
    • Brand: Zinetic compatible for Brother
    • Product type: Compatible
    • Product technology: Image Drum
    • Colour: Black Drum
    • Part numbers: Replacement for original Brother DR-2100

How many pages:

    Page yield 12,000 pages measured @ 5% page coverage
  • Compatible with the following printers: Brother DCP-7030 , Brother DCP-7040 , Brother DCP-7045N , Brother HL-2140 , Brother HL-2150 , Brother HL-2150N , Brother HL-2170 , Brother HL-2170W , Brother MFC-7320 , Brother MFC-7440N , Brother MFC-7840W

Compatible Black Brother DR-2100 Image Drum - (Brother DR2100) is in stock and available for the low price of £27. The Compatible Black Brother DR-2100 Image Drum is fully compatible with and guaranteed to work in the following Brother laser printers: Brother DCP-7030 , Brother DCP-7040 , Brother DCP-7045N , Brother HL-2140 , Brother HL-2150 , Brother HL-2150N , Brother HL-2170 , Brother HL-2170W , Brother MFC-7320 , Brother MFC-7440N , Brother MFC-7840W it will give you a page yield of Approx. 12,000 pages @ 5% average coverage. The Compatible Black Brother DR-2100 Image Drum is a reliable, low cost Compatible product and a money saving alternative for the original Brother DR-2100. Our own brand product will work in your laser printer in exactly the same way as an original IRTB_DR2100.

Reset procedure for the Brother DR2100 drum unit

This procedure will reset the DR-2100 drum counter back to zero and allow you to keep using your drum unit long after the Change Drum message appears.

It will not fix any quality issues it will simply allow you to keep printing beyond the set life of the drum unit.


HL PRINTER SERIES:

1.Remove the drum unit and toner cartridge. Wait 1 minute.
2.Replace the drum unit and toner cartridge into printer.
3.The Drum LED continues to blink if the drum counter was not reset when you replaced the drum. We need to reset this now!
4.Open the front cover of the printer
5.Press and hold down Go button for about 4 seconds until all the LEDs light up.
6.Once all 4 LEDs are lit, release the Go button
7.Close the front cover.
8.Your drum is now reset.


MFC / DCP PRINTER SERIES

1.Remove the drum unit and toner cartridge. Wait 1 or 2 minutes.
2.Replace the drum unit and toner cartridge into printer.
3.The error message "Change Drum Soon/Drum end soon" will continue to appear if the drum counter was not reset when you replace the drum unit.
4.To clear this error message, you need to reset the drum counter as instructed below.
5.Make sure that the machine is turned on.
6.Press Options or Press Clear or Clear/Back on the control panel.

If your Brother machine has a numeric keypad: Press 1 to reset the drum counter. If your Brother machine doesn't have a numeric keypad: Press the Up Arrow Key to reset the drum counter.

7.When the LCD shows Accepted, close the front cover.
8.Your drum is now reset.

Resetting the drum unit will not improve print quality. It only resets your drum and allows you to continue to print. You decide when to replace the drum unit not the manufacturer!

Will I ever have to buy a drum?

The answer to this question is YES. Our reset information above will allow you to extend the life of your drum unit considerably, but you will need to replace the drum unit when it can no longer produce a quality printed page.