Price exc vat :
Refill your empty Brother TN 1050 toner cartridge and save up to 80%.
Brother TN 1050 toner cartridges can be refilled via the hopper cap located on the outside of the cartridge. The method used to refill is Unplug, Empty and Refill
Each kit contains:
Page Yield 2000 pages @ 5% coverage. Double the page yield of the original cartridge
If you are refilling the starter cartridge that ships free with the printer you will also need to buy a reset gear.
The short video below shows you how easy it is to refill your empty cartridge.
Top tip: Reset the cartridge BEFORE refilling.
The printer will ask for the toner cartridge to be changed before all of the toner has been used. This is a waste of toner and your money. To avoid waste - put the printer into “Continue Mode” – this will force the printer to use up all of the remaining toner inside the cartridge !
To force the machine to continue printing after the LEDs indicate "Replace Toner" please follow the steps below:
Note: Make sure that the top cover is closed before you change the mode. When the LEDs indicate an error mode, you cannot change the mode.
DCP /MFC SERIES
For models with FAX functions
Since print quality cannot be guaranteed while in Continue Mode with Replace Toner status, when received faxes are printed, the LCD will ask if the print quality of the fax is OK.
If the print quality is not good: Press 2 (No) and the fax will be stored to the machine's memory so that you can print it again after the toner cartridge is replaced with a new one.
If the print quality is good: Press 1 (Yes) and the LCD will ask if you want to delete the printed fax from the memory.